QUALITY CONTROL ANALYSIS WITH SIX SIGMA-DMAIC METHOD IN EFFORT REDUCE NUMBER OF SUGAR PRODUCTS AT PT. PG. GORONTALO

  • University of 17 August 1945 Surabaya
  • University of 17 August 1945 Surabaya
Abstract views: 2490 , PDF downloads: 1253
Keywords: quality, six sigma, the cause of disability

Abstract

Companies need to maintain and improve the quality of products derived by applying a good quality control, because quality is an important factor in improving satisfaction and loyalityas consumers, as well as PT. PG .Gorontalo ; Six Sigma methods that have high discipline can help develop and deliver near-perfect products. The purpose of this study was to determine how the value of sigma PT .PG . Gorontalo and what factors of product defects. In this analyzis , researchers took 3 months of data production and analyze the Six Sigma DMAIC method. Researchers examined / analyzed using a questionnaire and the report of production to help get the material of analyzis. From this research , it has been showed that the presence of defects of products in the production process of PT. PG. Gorontalo at 5.664, 72 DPMO. It is also known that the cause is the human factor , machines, methods, materials, and environment. Based on these results , we can conclude that the value of sigma PT. PG. Gorontalo is located at 4 to 4.5 sigma, the factor most dominant cause of disability is due to lack of proper vacuum pressure

References

Anonim.Goesth dan Davis.1994. http://carapedia.com/pengertian _definisi_kualitas_info2173.html. Di akses tanggal 15 Oktober 2014
Anonim. Philip Kotler. http://.shvoong.com/busines-management/technology-operations-management/2071971-sejarah-sigma/ Diakses pada tanggal 15 Oktober 2014
Ariani, Dorothea W. 2004. Pengendalian kualitas statistik (Pendekatan Kuantitatif dalam Manajemen Kualitas). Yogyakarta: Penerbit Andi.
Daryanto, Sidik.2009. Usulan PerbaikanKualitas Produk Dudukan Magnet Dengan Metode Enam Sigma. Di akses pada tanggal 20 Oktober 2014
Gaspersz, Vincent. 2001. Total Quality Management. Jakarta : PT. Gramedia Pustaka Utama.
Gaspersz, Vincent. 2002. Pedoman Implementasi Six Sigma Terintegrasi dengan ISO : 2000, MBNQA, dan HACCP. Jakarta : PT. Gramedia Pustaka Utama.
Muis, Saludin. 2011. Metode 6 Sigma (Menciptakan Kualitas Produk Kelas Dunia).Yogyakarta : Graha Ilmu.
Nasution, Arman Hakim. 2006. Manajemen Industri. Yogyakarta : Penerbit Andi
Nurullah, Amalia ( Institut Teknologi Nasional Bandung) ; Fitria, Lisye; Adianto, Hari (2014), Perbaikan Kualitas Benang 20S Dengan Menggunakan Penerapan Metode Six Sigma-DMAIC Di PT. Supratex. REKA INTEGRA Vol 2, No 1 (2014): Edisi Kelima. Publisher: REKA INTEGRA
Shabrina Rahma Permatasari, Nasir Widha Setyanto, L. Tri Wijaya Nata Kusuma (2013), Penerapan Metode Six Sigma Dengan Pendekatan Metode Taguchi Untuk Menurunkan Produk Cacat(Studi kasus : Sentra Industri Genteng Tanah Liat Desa Pacar Peluk, Kecamatan Megaluh, Kabupaten Jombang) Implementationof Six Sigma Method With Taguchi Method Approach To Reducing Product Defects (a Case Study in the Industrial Centers of Pacar Peluk Clay Tile, Megaluh, Jombang)
Anupama Prashar, (2014) "Adoption of Six Sigma DMAIC to reduce cost of poor quality", International Journal of Productivity and Performance Management, Vol. 63 Issue: 1, pp.103-126, https://doi.org/10.1108/IJPPM-01-2013-0018
Heizer, Jay & Barry Render (2011). Manajemen Operasi .Edisi Sembilan. Buku Dua. Diterjemahkan oleh Chriswan Sungkono. Jakarta: Salemba Empat
Heizer, Jay & Barry Render (2010). Manajemen Operasi. Edisi Ketujuh Buku 1. Jakarta: Salemba Empat
Published
2018-09-27
Section
Articles