The prototype of A Forklift Robot Based on AGV System and Android Wireless Controlled for Stacked Shelves downloads: 0
The prototype of A Forklift Robot Based on AGV System and Android Wireless Controlled for Stacked Shelves downloads: 0
The prototype of A Forklift Robot Based on AGV System and Android Wireless Controlled for Stacked Shelves downloads: 0
Keywords:
Automated Guided Vehicle, Forklift Robotic, Android, Line Follower, Bluetooth
Abstract
The paper aims to build a prototype of an automatic forklift robot that can collect and place goods in the stacking shelves, that are monitored remotely using an Android-based device. The method used is AGV (Automated Guided Vehicle) on this forklift robot prototype to adjust its positions, by following a line that preset trajectory for stacking shelf positions, where this forklift robot can collect and place goods. The robot navigation system uses a photodiode for the line follower system, and for storage of goods, it uses the proximity sensors detecting the presence of goods on miniature stacking goods and decide where it can store a good or not on that designated cell of the stacking shelf. The miniature of stacking shelves is two by three cells. The control of the robot has two input controllers. One is on a robot itself. The other was on handheld based on Android operating systems, which control remotely using the wireless system with Bluetooth protocol. The results of the discussion on paper, the forklift robot could manage the task given as the predefined line to a followed parameter of stacking shelves with two by three-stack configuration for collect and place goods into their positions, the average time for the robot to collecting and placing goods on stacking from standing still position to stacking shelf then back to the robot origin position. It resulted in the shortest processing time around 43 seconds and the longest time around 45,3 seconds from the start position to stacking shelf position.
Downloads
Download data is not yet available.
Author Biography
, Department of Electrical Engineering, Institut Teknologi Adhi Tama Surabaya
Department of Electrical Engineering, Institut Teknologi Adhi Tama Surabaya, Indonesia
References
[1] J. Sankari and R. Imtiaz, "Automated guided vehicle (AGV) for industrial sector," 2016 10th International Conference on Intelligent Systems and Control (ISCO), Coimbatore, India, pp. 1-5, 2016.
[2] K. C. T. Vivaldini et al., "Robotic forklifts for intelligent warehouses: Routing, path planning, and auto-localization," 2010 IEEE International Conference on Industrial Technology, Vina del Mar, pp. 1463-1468, 2010.
[3] M. Khairudin, Z. Mohamed, and A. R. Husain, “Dynamic model and robust control of flexible link robot manipulator,” Journal Telkomnika, vol. 9, no. 2, pp. 279–286, 2011.
[4] R. K. Miller, D. G. Stewart, W. H. Brockman and S. B. Skaar, "A camera space control system for an automated forklift," in IEEE Transactions on Robotics and Automation, vol. 10, no. 5, pp. 710-716, Oct. 1994.
[5] Weehong Tan, "Modeling and control design of an AGV," Proceedings of the 41st IEEE Conference on Decision and Control, 2002., Las Vegas, NV, USA, pp. 904-909 vol.1, 2002.
[6] E. Sutra, "Wireless Ps2 Joystick Control System on Arduino-Based Wheeled Robot," Thesis, Sriwijaya Polytechnic pp. 5–37, 2015.
[7] Imam Tabroni, “Omnidirectional Robot Forklift Prototype and Microcontroller-Based Arm Atmega1284 and Joystick”.
pp. 1–9. Thesis. UNY
[8] Zulpadrianto, Yulkifli, and Yohandri, “Making a Digital Interface System for Physics Student Data Display”, FMIPA Padang state univ. vol. 5, no. 2, pp. 9–16, 2015.
[9] A. Fahruzi, and A. Suryowinoto, “Implementation of PID Control in Magpies Egg Incubators”, Journal Inform, Vol 4, No 1, pp. 4-10, 2019.
, & . (2020). The prototype of A Forklift Robot Based on AGV System and Android Wireless Controlled for Stacked Shelves. International Journal of Artificial Intelligence & Robotics (IJAIR), 2(1), 1-7. https://doi.org/10.25139/ijair.v2i1.2621
Authors who publish with International Journal of Artificial Intelligence & Robotics (IJAIR) agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.
Abstract views: 643
,
PDF downloads: 404
