Improvement of DC Motor Speed Control for Mobile Robot to Minimize Slip Phenomenon

Authors

DOI:

https://doi.org/10.25139/inform.v6i1.3406

Keywords:

Slip, Omnidirectional, Mobile Robot, DC Motor Speed

Abstract

Slip on the mobile robot has a significant impact on the maneuver and the accuracy of the mobile robot movement. The slip phenomenon occurs because of the loss of traction between the surface and the wheels due to the spontaneous acceleration or declaration application. This paper presents a method to improve DC motor performance by using slip control as an observer such that the slip phenomenon effect can be minimized. The performance that will be analyzed is the accuracy of motor speed and robot position accuracy when the robot is moving. The result shows that the Root Mean Squared Error (RMSE) for the motor speed performance that does not use slip control is 2.680, the system using slip control produces RMSE 1.3393. Regarding the robot position accuracy, the RMSE of the system that does not use slip control is 0.0379, the system using slip control is 0.0065.

References

[1] A. Pandey, et al., "Mobile Robot Navigation Techniques", International Robotics & Automation Journal, Vol. 2 Issue 3, 2017.
[2] E. Lucet, et al., "Experimental Study of A Fast Mobile Robot Performing A Drift Maneuver", WSPC - Proceedings, DOI: 10.1142/9789814329927_0144, 2010.
[3] K. Lyong Han, et al., "Design and Control of Mobile Robot with Mecanum Wheel", IEEE, 2014.
[4] F. Ribeiro, et al., "Three Omni-Directional Wheels Control On A Mobile Robot", 2014.
[5] L. Yuan Ping, "Slip Modelling, Estimation and Control of Omnidirectional Wheeled Mobile Robots with Powered Caster Wheels", Thesis, 2009.
[6] Y. Kristyawan and A. D. Rizhaldi, “An Automatic Sliding Doors Using RFID and Arduino,” Int. J. Artif. Intell. Robot., vol. 2, no. 1, p. 13, 2020.
[7] Y. I. Chandra, M. Riastuti, K. Kosdiana, and E. P. Nugroho, “Automatic Garden Umbrella Prototype with Light and Rain Sensor Based on Arduino Uno Microcontroller,” Int. J. Artif. Intell. Robot., vol. 2, no. 2, p. 42, 2020.
[8] H. Taheri, et al., "Kinematic Model of a Four Mecanum Wheeled Mobile Robot", International Journal of Computer Application, 2015.
[9] K.H. Ang, et al., "PID Control System Analysis, Design, and Technology", IEEE Transaction on Control System Technology, Vol.13 No.4, 2015.
[10] Y.Y. Tzou, "Design And Implementation Of All Fpga-Based Motor Control Ic For Permanent Magnet Ac Servo Motors," International Conference on Industrial Electronics, Control and Instrumentation, vol.2, pp.943-947, 1997.
[11] Shih-An LI, et al.," Design Of The Wheeled Robot Motor Controller", ISPACS, pp. 250-253, Nov. 2012.
[12] Dong-Eon Kim et al.," Using Current Sensing method and Fuzzy PID Controller for Slip Phenomena Estimation dan Compensation of Mobile Robot", International conference on ubiquitous robots and ambient intelligence (URAI), pp. 397-401, 2017.

Downloads

Additional Files

Published

2021-01-31

How to Cite

Improvement of DC Motor Speed Control for Mobile Robot to Minimize Slip Phenomenon. (2021). Inform : Jurnal Ilmiah Bidang Teknologi Informasi Dan Komunikasi, 6(1), 28–34. https://doi.org/10.25139/inform.v6i1.3406

Issue

Vol. 6 No. 1 (2021)

Section

Articles

License

Authors who publish with Inform: Jurnal Ilmiah Bidang Teknologi Informasi dan Komunikasi agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal. 

  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.

  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.