Peningkatan Keselamatan Pada Simpang Dengan Menerapkan RHK Sepeda Motor (Studi Kasus Simpang Empat Bersinyal Srikandi Di Kabupaten Pasuruan)
Abstract views: 504
,
PDF downloads: 294
Abstract
Pasuruan Regency is one of the regions in Indonesia which is precisely located in the province of East Java. With a very rapid economic development will certainly affect the flow of traffic, especially at the intersection. One of the most populous intersections is the Srikandi Four Intersection which is located in Pandaan District. To improve safety at an intersection, traffic management is necessary. This study aims to analyze the performance of the intersection by using the MKJI calculation and calculate the area of the Special Stop Room (RHK) of a motorcycle that refers to the Guidelines for Designing Motorcycle RHK at a Signed Intersection in the Urban Area planned on Jalan R.A. Kartini and Jalan A. Yani. The method used to plan the RHK of this motorcycle uses quantitative descriptive methods and qualitative descriptive methods. Intersection performance results obtained from calculations for the existing conditions of the North approach capacity (Jalan Urip Sumoharjo) 252 pcu / hour, queue length 131 m, degree of saturation of 0.85. Eastern approach capacity (Jalan Pahlawan Sunaryo) 265 pcu / hour, queue length 146 m, degree of saturation 0,85. South approach capacity (Jalan R.A. Kartini) 579 pcu / hour, queue length 134 m, degree of saturation of 0.85. The Western approach capacity (Jalan A. Yani) is 730 pcu / hour, the queue length is 104 m, the degree of saturation is 0.85, while the average delay is 59.10 seconds / pcu. From the performance analysis of the intersection, the length of the RHK motorcycle for the R.A. Kartini is 11.5 meters long, while for Jalan A. Yani it is 10.3 meters long.
References
Astuti, Naomi, Purba dan Jeluddin Daud. (2013). ”Perencanaan Ruang Henti Khusus (RHK) Sepeda Motor Pada Persimpangan Bersinyal Di Medan (Studi Kasus : Persimpangan Jl. Ir. H. Juanda – Jl. Brigjend Katamso)”, Jurnal Purba, Vol.3, No.1, 2014, Jurusan Teknik Sipil USU, Medan.
Ayu, Reska, Yuniar, dkk. (2016). “Analisis Efektivitas Ruang Henti Khusus Sepeda Motor Pada Simpang Bersinyal Di Kota Semarang”, Jurnal Karya Teknik Sipil, Vol.5, No.2, 2016, Hal 128-137, Jurusan Teknik Sipil UNDIP, Semarang.
Balai Teknik Lalu Lintas dan Lingkungan Jalan. (2012). “Modul Pelatihan Perancangan RHK”. Pusat Penelitian dan Pengembangan Jalan dan Jembatan. Bandung.
Departemen Perhubungan. (2004). “Undang-Undang Nomor 38 Tahun 2004 tentang Jalan”. Jakarta.
Departemen Perhubungan. (2009). “Undang-Undang Nomor 22 Tahun 2009 tentang Lalu Lintas dan Angkutan Jalan”. Jakarta.
Direktorat Jendral Bina Marga. (1997). “Manual Kapasitas Jalan Indonesia”. Jakarta.
Idris, M. (2007). “Pengaruh Ruang Henti Khusus Sepeda Motor Terhadap Konflik Lalu Lintas Pada Satu Persimpangan Bersinyal Di Bandung”, Tesis, Teknik, Teknik Sipil, ITB, Bandung.
Idris, M. (2007). “Pengembangan Standar Lajur Sepeda Motor Pada Ruas Jalan dan Persimpangan”, Puslitbang Jalan dan Jembatan, Departemen Pekerjaan Umum, Bandung.
Idris, M. (2010). “Kriteria Sepeda Motor Untuk Ruas Jalan Arteri Sekunder”, Puslitbang Jalan dan Jembatan, Departemen Pekerjaan Umum Bandung.
Nainggolan, Jesicha, dkk. (2018). “Studi Efektivitas Ruang Henti Khusus (RHK) Sepeda Motor Pada Simpang Bersinyal”. Jurnal JRSDD, Vol.6, No.3, September 2018, Hal 259-271. Jurusan Teknik Sipil UNILA, Bandar Lampung.
Ratnaningsih, Dwi. (2013). “Analisis Kinerja Simpang Ciliwung Kota Malang”. Jurnal PROKONS, Vol.10, No.2, Agustus 2013, Hal 127-131, Jurusan Teknik Sipil POLINEMA, Malang.
Riantara, Youngky, Putra dan Ervina Ahyudanari. (2016). “Simulasi Perencanaan Ruang Henti Khusus Pada Simpang Bersinyal Jalan Dr.Ir.H. Soekarno-Jalan Kertajaya Indah Surabaya Ditinjau Dari Nilai Tundaan”, Jurnal Teknik ITS, Vol.5, No.1, 2016, Hal E10-E16, Jurusan Teknik Sipil ITS, Surabaya.
Roesdyningtyas, Ayu, dkk. (2016). “Kajian Rencana Penerapan Ruang Henti Khusus Sepeda Motor Di Persimpangan Bersinyal (Studi Kasus Kota Malang)”, Jurnal, Vol.14, No.2, Agustus 2016, Hal 123-129, Jurusan Teknik Sipil UB, Malang.
Copyright (c) 2020 Yordan Suryoatmojo
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
